Asphalt Driveway Paving & Installation Hills, IA 52235

Asphalt Paving in Hills, IA (52235) · Local Professionals

Iowa City Asphalt Paving · Fast response in Hills and the Iowa City area · Free estimate 24h

✅ Written Estimates & Tonnage Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm

+39Verified Reviews

13Years in Business

4.9 ★Google Rating

24/7Available

Hills sits on some of the trickiest ground in Johnson County, where the Iowa River bottomland gives way to moisture-sensitive alluvial soil that moves with every freeze and thaw. Your driveway is fighting that ground every winter, and when it starts to crack or sink, you need a local paving crew who understands why it happened and how to fix it right.

Iowa City Asphalt Paving has been serving Hills and the surrounding area since 2013. We know the soil under your driveway, the winter that breaks it apart, and the difference between a patch that holds and money thrown away on a repair that won't last. When your driveway needs work, call us at (319) 519-4420 for a free on-site estimate.

Asphalt Paving in Hills (52235)

Hills sits in a transition zone. The alluvial soils near the Iowa River bottomland are fine grained and moisture sensitive, which means they move when water gets into them and the frost line hits around 42 inches deep. A driveway without a properly compacted aggregate base will heave in winter and settle unevenly in spring, opening cracks and eventually alligator cracking that means the base is failing underneath. The older, narrower driveways common in Hills sit on lots that don't always give a paver and a roller easy access, and drainage around foundations matters more here than it does on higher ground. Snowplow wear is real too, especially on aprons and edges where the blade catches the pavement.

We have been paving driveways, parking lots, and private roads in Hills and across the Iowa City area for over a decade. We know how to build a base that won't heave, how to work on tight lots, and how to handle the drainage and grading that keeps water away from your foundation and your neighbor's property line.

Our services in Hills

Asphalt Driveway Paving & Installation in Hills · Iowa City driveways sit on windblown loess that shifts hard through a 42-inch…
Driveway Repair in Hills · Iowa City driveways crack and heave each spring when the 42-inch frost line…
Pothole Repair & Asphalt Patching in Hills · Iowa City potholes open every spring after plows and freeze-thaw work through a…
Asphalt Resurfacing & Overlay in Hills · Iowa City driveways with a solid base often just need a fresh wearing surface.
Asphalt Milling & Removal in Hills · Older Iowa City driveways near downtown often need the failed surface milled…
Driveway Replacement in Hills · Iowa City driveways broken past repair need the old surface removed down to…
Parking Lot Paving & Construction in Hills · Iowa City's subdivision growth and university traffic put steady load on new…
Parking Lot Repair & Resurfacing in Hills · Iowa City parking lots crack and pothole fast once a hard winter works into the…
Recycled Asphalt & Millings Driveways in Hills · Iowa City landowners with long rural drives often choose recycled asphalt…
Tar & Chip Driveways in Hills · Iowa City homeowners choose tar and chip for a textured driveway that still…
Gravel Driveway Installation & Grading in Hills · Rural properties around Iowa City often start with a graded gravel drive before…
Private Road & HOA Paving in Hills · Johnson County's subdivision growth keeps HOA boards paving new private roads…
Driveway Extensions, Widening & Aprons in Hills · Older near-campus homes in Iowa City often need a widened drive or a rebuilt…
Sports Court & Path Paving in Hills · Iowa City backyard courts need a base built to resist loess ground moving…

How a Job Works in Hills

We start with a free on-site visit. We measure your driveway or lot, look at the existing pavement and subgrade, check for drainage problems, and talk through what you need. If you have an HOA or if your property sits on a lot line that needs attention, we flag that early. We give you a written estimate with square footage, thickness, tonnage, and a realistic price. No surprises.

When we schedule the work, we coordinate around local permit timing if it applies to your job (curb cuts, aprons, and impervious surface limits vary by jurisdiction in Johnson County). On the day itself, we bring a paver and a roller, we work the base if it needs it, we lay the asphalt to the thickness we quoted, and we compact it properly so it will not heave under your driveway next winter. If your lot is tight or your access is narrow, we plan for that. We clean up when we are done, and we walk through the finished job with you.

New asphalt cures for six to twelve months after it is laid. During that time, do not seal it. The pavement needs to cure fully before any sealing work, and we will tell you when it is ready.

Driveway paving in Hills typically runs from six dollars per square foot and up, depending on the base condition, thickness, and what we find when we dig. If your driveway just needs the top layer refreshed and the base is sound, resurfacing or overlay work starts around four dollars per square foot. Repair work, like pothole patching or edge work, starts at four hundred fifty dollars for a single problem spot. A full driveway replacement, when the base has failed and the pavement cannot be salvaged, runs from seven dollars per square foot and up. Parking lot work is quoted by the job. The real cost drivers are square footage, how much base work is needed, whether we are grading and compacting, and the thickness of asphalt the job requires. Call us at (319) 519-4420 for a free estimate. We measure on site, we give you a written quote, and we explain what you are paying for.

✅ Written Estimates & Tonnage Specs, fully insured for work in Hills and nearby areas.

Why do driveways in Hills crack and sink faster than driveways on higher ground around Iowa City?

Hills sits on alluvial soil from the Iowa River bottomland, which is fine grained and holds moisture. When water gets into the soil under your driveway and the frost line freezes to around 42 inches, that soil expands and contracts. Without a properly compacted aggregate base underneath the asphalt, your driveway heaves in winter and settles unevenly in spring. The freeze-thaw cycle is what actually breaks the pavement apart here. That is why base work matters so much in Hills, and why we do not cut corners on compaction.

My driveway has a few potholes and some cracking around the edges. Can you patch it, or does it need to be replaced?

It depends on how much of the surface is damaged. If the cracking is scattered and less than about thirty to forty percent of the driveway, patching and edge repair make sense and will hold. If you have extensive alligator cracking (a web of cracks that looks like alligator skin), the base has failed and a patch will not last long. In that case, resurfacing or overlay is the better investment. Call us at (319) 519-4420 and we will look at it on site. We will tell you honestly whether to patch or resurface.

What is the typical cost to pave a driveway in Hills?

A typical residential driveway in Hills runs from six dollars per square foot for new paving, depending on the base condition and the thickness we lay. Resurfacing an existing driveway starts around four dollars per square foot. A fifty-by-twenty-foot driveway (one thousand square feet) would run roughly six thousand dollars for new paving, or four thousand dollars for resurfacing, before any base work. These are ballpark figures. The actual price depends on what we find when we visit your property. Square footage, base condition, grading, and drainage all factor in. We give you a written estimate with all of those details before we start.

Do I need a permit to pave my driveway in Hills?

Permit requirements in Johnson County vary by municipality. Hills has its own rules for driveway aprons, curb cuts, and impervious surface limits. If your job involves an apron at the street, a curb cut, or grading that affects drainage, a permit may be required. We help you navigate local permitting and can tell you whether your specific job needs one. Contact the Hills city clerk or your local building department to verify, and let us know what they tell you. If you have an HOA, check your architectural standards too, because some master-planned communities have rules about driveway materials and extensions.

My property is part of an HOA. Can I pave my driveway without HOA approval?

No. Most HOAs have architectural standards that govern driveway material, color, and extensions. You need to verify your HOA rules before you start any work. Some HOAs require written approval for any driveway paving or widening. Others restrict material (for example, some require asphalt and do not allow recycled millings or tar and chip). We can help you coordinate with your HOA once you know what your rules say, but the rules themselves vary and must be checked with your HOA board or architectural review committee. Do that first.

Are you fully insured for the work you do on my property?

Yes. We carry full general liability and workers' compensation insurance. When we work on your property, you are protected. Ask us for proof of insurance before we start, and verify it with the insurance carrier if you want to. That is smart practice with any contractor.

When is the best time of year to pave a driveway in Hills?

Late spring through early fall is ideal. We can pave in cool weather, but the asphalt needs warm enough conditions to compact properly. In Hills, that means May through September is our busy season. If you have an emergency, like a pothole that is a trip hazard or a sunken apron holding water against your foundation, we can often fit you in sooner. After a winter thaw, we see a lot of frost heave damage and pothole calls in March and April. If you are planning a new driveway or resurfacing, give us a call in spring or early summer so we can schedule you before the rush. Do not seal new asphalt for the first six to twelve months while it cures.